In this video, you will find the exact location of the engine oil filter on the 3.0L V6 engine. If you are getting ready to perform a routine oil change, preparing your tools, or trying to spot the filter from under the vehicle without making a mess, knowing its precise location beforehand will save you a lot of time and effort.
How this video helps you: On this compact V6 layout, the oil filter can be tricky to spot from above because it is tucked underneath front engine accessories and structural components. This quick and clear visual guide shows you exactly where the oil filter is situated. You can see its position perfectly, know exactly which direction it faces, and see how to position your oil catch pan underneath so you don’t drop oil onto the front frame rail or exhaust during removal.
Important tips for replacing your Engine Oil Filter:
- Check the Old Gasket: When you spin the old filter off, always double-check that the black rubber O-ring gasket came off with it. If it stays stuck to the engine adapter block and you spin the new filter on over it (known as “double-gasketing”), it will blow out and cause a catastrophic oil leak as soon as you start the engine.
- Lubricate the New Seal: Before spinning the new filter on, smear a clean film of fresh engine oil onto the rubber gasket of the new filter. This ensures a proper seal and prevents it from sticking when you have to remove it at the next oil change.
- Hand-Tighten Only: Spin the new filter on until the rubber gasket makes firm contact with the engine block mounting surface, then turn it an additional 3/4 to 1 full turn by hand. Never use an oil filter wrench to tighten it, as over-tightening can crush the gasket or strip the threads.
Watch the video to see the exact location and get your oil change done faster!