In this video, I show you only the exact steps to remove the side-view mirror assembly on a 2010-2017 Chevrolet Equinox.
Knowing exactly where the mounting nuts are hidden behind the interior trim and how to safely disconnect the wiring will save you time and prevent you from dropping the mirror or scratching your vehicle’s paint during this DIY repair.
Common Reasons for Replacing a Side-View Mirror:
- The mirror glass is cracked, shattered, or the heating element has stopped working
- The plastic outer housing is broken or scuffed from a parking lot scrape or tight garage entry
- The internal power adjustment motor is dead, preventing you from adjusting your line of sight
- The mirror assembly has become loose, shakes violently while driving, or won’t hold its position
- You need to remove the mirror to perform clean paintwork, body repairs, or door trim replacement
Safety First
Always prioritize safety and caution when handling electrical parts and exterior components. Before unbolting the mirror, disconnect the negative battery terminal to avoid short-circuiting the power mirror control circuits. Use non-marring plastic trim tools to pry off the interior trim covers without scratching the soft interior panels. Wear safety glasses to protect your eyes from snapping plastic clips, and always keep one hand securely on the outside of the mirror housing while removing the final mounting nut so it doesn’t fall off and smash against the ground or dent your door.
Need Help? Ask an Expert
I am an experienced mechanic, and I am here to help you guide your vehicle projects to a successful finish. If you hit a snag trying to pop off the interior sail panel cover, have trouble routing the wiring harness connector through the door shell, or are dealing with a tricky breakdown, leave a message in the comments below. Let me know what you are running into, and I will help you solve your car’s problem!