How to drain coolant Chevrolet Trax 2013-2022 Location

In this video, I show you only the exact location and process to drain the engine coolant on a 2013-2022 Chevrolet Trax.

Knowing the precise location of the lower radiator hose or drain area will save you time and prevent a messy cleanup during your DIY cooling system service.

Common Reasons for Draining Your Coolant:

• Performing a routine scheduled cooling system flush and fluid refresh
• Replacing a cracked plastic thermostat housing, water pump, or leaking surge tank
• Changing out old, degraded coolant that has lost its rust and corrosion inhibitors
• Fixing a cross-contamination issue after an engine component repair
• Preparing the system for a fresh mixture of clean antifreeze before winter arrives

Safety First

Always prioritize safety when opening any part of the engine cooling system. Never attempt to drain the coolant or remove the pressure cap while the engine is hot. The system operates under high pressure, and escaping boiling liquid or steam can cause severe, painful burns. Ensure the vehicle is safely parked on a flat, level surface, the engine is completely cold, and the keys are out of the ignition. Protect your eyes and skin by wearing safety glasses and fluid-resistant work gloves, use a large, clean drain pan to catch the escaping fluid, and keep pet or wildlife safety in mind as antifreeze is highly toxic.

Need Help? Ask an Expert

I am an experienced mechanic, and I am here to help you guide your vehicle projects to a successful finish. If you hit a snag trying to release a stubborn constant-tension hose clamp, aren’t sure how to properly bleed the air pockets out of the system after refilling, or are dealing with a tricky breakdown, leave a message in the comments below. Let me know what you are running into, and I will help you solve your car’s problem!